samedi 6 février 2010


LeXTAC has been inspired by a great Californian boutique amplifier.

· Ch 1 (Clean/Yellow): gain, bass, middle, treble, contour, power amp gain volume, 3 positions pre eq, gain boost.

· Ch 2 & Ch 3 (Blue & Red): gain, bass, middle, treble, contour, power amp gain, volume, 3 positions pre eq, gain-structure, gain boost and plexi mode.

All channels have a 3 positions Pre EQ switch : Normal, Bright and Brighter. The higher you set the gain control, the less effect the Pre EQ will have on the sound. All channels also have a gain boost.

Channel 2 & 3 (Blue & Red) have two other switches to give the user different gain/tone :
· The Plexi channel is a lower gain channel than the normal Blue & Red ones. The plexi channel can be assigned to either Channel 2 or 3. Note: structure switch and Gain Boost switch are inactive in Plexi mode.

· The Structure switch is an overall gain reduction switch for Channels 2 & 3. When ON (high position), both channels 2 & 3 have less gain. Obviously, when OFF (down position), the preamp will more gain.

The beautiful GUI was design by requietus.

Thanks again to all the testers.

Some demo clips by Dimitar Nalbantov :





Make a donation if you think it sounds good and it's useful for you.